PRODUCT DESCRIPTION: M-1 Advanced Mildewcide can be added to interior and exterior coatings when additional protection is required to control surface mold, mildew and algae growth on the coating. M-1 will not hurt the environment and is non-toxic. It does not contribute to the odor or VOC of paint. M-1 is recommended for use in coatings applied in high humidity environments and for applications where mildew has been a problem in the past. DO NOT treat over existing mold, mildew or algae. Always sanitize the substrate and clean thoroughly before re-coating. Prepare the surface prior to painting by cleaning and scrubbing with bleach, water and detergent. Rinse thoroughly. Eliminate sources of moisture whenever possible and increase air flow by cutting back shrubbery prior to re-coating. M-1 should still be working hard to protect the paint film after 3 years.
WHERE TO USE IT: Exterior and interior paints and stains.
RATE OF APPLICATION: 1.5 oz per gallon of paint or stain; the 7.5 oz jar is enough for 5 gallons of paint or stain, oil or water base.
*** CANNOT BE SHIPPED OUTSIDE THE UNITED STATES ***